Buying Used Jeep Parts - Guide & Tips

Do you need replacement used Jeep parts? Our extensive network of Jeep salvage/junkyards and auto recyclers can be a great place for you to find that incredible good buy of Jeep used parts. Note the terms "Jeep Used Salvage Yard Part", "Jeep Recycled Part", "Jeep Salvage Part", "Jeep Quality Replacement Part" or "Jeep Like Kind Quality Part" refer to Jeep used parts.

Finding a used part in a modern salvage yard is similar to the shopping experience one would have in a contemporary retail store. Many of our salvage yards and used car part dealers use an advanced part inventory system. Digging through loads of rusty old cars is a job with in itself and a style of business from the past. A wrecked Jeep car or truck is initially brought into the salvage yard to be dismantled. Then its useable parts get stored in a warehouse. Generally, the fast-moving popular parts such as bumpers, headlights, taillights, radiators, alternators, and seats are standing by on the display shelves.

Our locating service connects you with a major network of salvage yards around the country. Our system will provide you with the essential vehicle/part information and the price within a few seconds. We can save you hours of frustration by eliminating the tedious time spent calling customers and/or salvage yards. Find below some of the salvage yards that may stock the Jeep parts you are looking for:

We are ready to help you find parts for all Jeep models such as CJ5, Grand Wagoneer, Wagoneer. Note all Jeep part price quotes are negotiable to an extent, so do not walk out from a deal before trying to barter. For example, if you get a price quote on a Quarter Panel Assembly or Leaf Spring (Front) for your Jeep that is only in a reasonable condition, you may be able talk the price down. In general, your used Jeep part will cost you about half the price of a new Jeep OEM part.

FYI: Salvage yard dismantles only complete assemblies such as Ignition Switch, Leaf Spring (Front), Lower Control Arm (Rear), Seat Track (Front), Radiator, Carrier Assembly, AWD, Radio, Fender, Transfer Case, Fuel Injection Pump, Bumper Guard (Front), Side, Sliding Door, Clutch Slave Cylinder, Water Pump, Bumper Shock, Torsion Bar, Fuel Injection Parts, Center Pillar and other. This kind of parts is a good candidate for Jeep quality replacement part. Another good candidate for quality replacement part could be the expensive Jeep electronic equipment such as audio system, car speakers, radio, stereo and computer.

Note: We do not recommend inexpensive Jeep mechanical, maintenance parts, or labor-intensive components as candidates for QRP. Save yourself time, money and frustration - Do not buy used mechanical/repair parts such as Jeep Washer Hose, Wrist Pin Bushing Set, EGR Back Pressure Filter, Cold Start Valve O-Ring, Headlight Wiper Bl. Set, A/C "ON-OFF" Switch, Tachometer, Seat Knob, Cylinder Head, C.V. Boot Clamp Kit, ABS Pressure Monitor Sw, Fuel Pump Mounting Brkt., Auxiliary Shaft Belt, Adapter Retainer, Brake Pressure Switch, Oil Relief Valve, Brake Warning Valve Kit, K&N Filter Cleaner, Reservoir Pick-up Tube, Thermostat and other. Note you can buy a new aftermarket Jeep mechanical part for a little bit more money but without the possibility of failure after installation.